Filter
Top Products
Collating Output
QMS 4525 Print System User's Guide5-16
The PRINT command syntax for multiple copies is
$ PRINT/COPIES=
number
filename
Your choice for
number
may be any number between 1 and 1000. If
you use a number greater than 1000, only 1000 copies will print. (See
the
VMS Interface for QMS Printers
manual for complete information.)
You may also use the VMS PRINT command qualifier JOB_COUNT
to print multiple collated copies of your entire print job. The PRINT
command syntax using the JOB_COUNT qualifier for multiple col-
lated copies is
$ PRINT/JOB_COUNT=
number filename
Your choice for
number
may be any number between 1 and 1000. If
you use a number greater than 1000, only 1000 copies will print. (See
the
VMS Interface for QMS Printers
manual for complete information.)
Using UNIX Commands
If you are connected to the printer through a UNIX host, and you have
QMS UNIX host software installed, you can use the -# option to the
qpr command to print multiple copies.
The qpr command syntax for printing multiple copies is
qpr -#
number
filename
Your choice for
number
may be any number between 1 and 1000. If
you use a number greater than 1000, only 1000 copies will print. (See
the
QMS UNIX Host Software
manual for complete information.)
Collating Output
Collation is the printing of sets of multiple copies of a document in
numeric order. On the QMS 4525 Print System you can specify multi-
ple copies of your document in uncollated or collated order, and you
can direct them to either of the optional sorter bins or to the optional