Fortinet Version 3.0 Network Router User Manual


 
Setting up FortiBridge units FortiBridge unit basic information
FortiBridge Version 3.0 Administration Guide
09-30000-0163-20061109 19
Setting up FortiBridge units
This chapter contains the information you need to unpack, connect, and configure
your FortiBridge unit:
FortiBridge unit basic information
Connecting and turning on the FortiBridge unit
Connecting to the command line interface (CLI)
Completing the basic FortiBridge configuration
Resetting to the factory default configuration
Installing FortiBridge unit firmware
When you complete the procedures in this chapter, the FortiBridge unit will be
operating and connected to your network and to your FortiGate unit. See
“Configuration and operating procedures” on page 35 to configure the FortiBridge
unit to monitor the status of the FortiGate unit and to fail open if the FortiBridge
unit detects that the FortiGate unit has failed.
FortiBridge unit basic information
This section describes the following basic information about the FortiBridge units:
FortiBridge-1000 Package contents
Mounting instructions
Technical specifications
LED indicators
Connectors
Factory default configuration
FortiBridge-1000 Package contents
The FortiBridge-1000 package contains the following items:
the FortiBridge-1000 unit
two orange crossover Ethernet cables (Fortinet part number CC300248)
one RJ-45 to DB-9 serial cable (Fortinet part number CC300302)
FortiBridge-1000 QuickStart Guide
CD containing the Fortinet user documentation
one AC adapter