FortiBridge Version 3.0 Administration Guide
22 09-30000-0163-20061109
FortiBridge unit basic information Setting up FortiBridge units
Connectors
Factory default configuration
Table 5: FortiBridge-1000 connectors
Connector Type Speed Protocol Description
INT 1 RJ-45 10/100/1000
Base-T
Ethernet Copper gigabit ethernet connection to the internal
network.
EXT 1 RJ-45 10/100/1000
Base-T
Ethernet Copper gigabit ethernet connection to the
external network.
INT 2 RJ-45 10/100/1000
Base-T
Ethernet Copper gigabit ethernet connection to the
FortiGate unit internal interface.
EXT 2 RJ-45 10/100/1000
Base-T
Ethernet Copper gigabit ethernet connection to the
FortiGate unit external interface.
CONSOLE RJ-45 9600 bps RS-232
serial
Optional connection to the management
computer.
Provides access to the command line interface
(CLI).
Table 6: FortiBridge-1000F connectors
Connector Type Speed Protocol Description
INT 1, INT 2,
EXT 1,
EXT 2, and
management
LC SFP 1000Base-SX Ethernet Multimode fiber optic connections
to gigabit optical networks. The
FortiBridge-1000F is shipped with
4 1000Base-SX Small Formfactor
Pluggable (SFP) transceivers that
you must insert into the INT 1, INT
2, EXT 1, and EXT 2 sockets on
the back panel. The management
connection is optional.
CONSOLE RJ-45 9600 bps RS-232
serial
Console connection to the
command line interface (CLI).
Table 7: FortiBridge-1000 and 1000F unit factory default network configuration
Administrator account admin
Password (none)
Management IP/Netmask 192.168.1.99/255.255.255.0
Management Access Telnet, SSH and ping access to the INT 1
interface. No management access to the EXT 1
interface.
Routes (none)
Primary DNS 65.39.139.53
Secondary DNS 65.39.139.63