Filter
Top Products
64
4 Select the adapter for which settings are changed from the
adapter list on the left of the window, and double-click "Topology"
in "Parameters".
When there are two or more adapters, refer to "Appendix A How to Identify the Adapter"
(
pg.74).
5 Set a value for "New Value" depending on the connection type,
check "Permanent", and click [Change].
When the connection type varies for each adapter, remove the check from the "Global"
checkbox.
• When all the installed adapters are FC-AL connection:
• When only the adapter under setting is Fabric connection:
6 Double-click "QueueDepth" in "Parameters".
Connection type New Value
FC-AL 0
Fabric 1