Filter
Top Products
5 4Gbit/s FC I/O Module Details Setting 71
E
5.2 Registry Setting
1 Click the "Start" button → "Run..." in this order.
2 Enter a name in "Name" as follows, and click [OK].
regedit
The registry editor starts.
3 Follow the paths below.
\HKEY_LOCAL_MACHINE
\SYSTEM
\CurrentControlSet
\Services
\Disk
4 Check that the key name "TimeOutValue" values have the relations
described in the table below.
If there is no value in the "TimeOutValue", add it as follows:
Table: values in the "TimeOutValue"
5 After finishing all the settings, restart the server blade.
- Data type : REG_DWORD (DWORD type)
- The name of the value : TimeOutValue
- The data of the value : (Refer to the following table)
- Base : Hexadecimal
Product names
Connection configuration
Single connection Cluster configuration
Windows Server 2003 3c (hexadecimal) 3c (hexadecimal)
After configuring the cluster, recheck these settings. If the settings are incorrect,
perform the setting again.