Fujitsu LPF-QSD1W Projector User Manual


 
E-25
EnglishDeutschEspañolFrançaisItalianoPortuguês
඾ġུġࢊ
Póññêèé
Ё᭛
Connect the picture signal cable to any one of the HDMI input terminal, component picture input terminal, S picture input terminal, or
picture input terminal.
When the equipment to be connected is equipped with the HDMI output terminal or the component picture output terminal, connection to
either of these terminals is recommended.
SATELLITE TUNER
To S-video output
To video output
To component video input
To audio outputs
To video input
To S-video input
To audio
inputs
To component video output
Rear side of AV Selector
BS/110-degree CS Antenna
UHF Antenna
To HDMI output
To HDMI input
Note
Unplug the power cord from the AC outlet before you connect external components.
Also refer to the instructions for the component to be connected.
The projector unit has no speaker function. To produce sound, connect it to an external amplifier.