Filter
Top Products
E-32
BASIC OPERATIONS (Continued)
ADJUSTING THE RECTANGULAR DISTORTION OF THE PICTURE
1
Press \.
The adjustment menu display appears.
2
Press CD to select "Correct Keystone".
3
Press <.
The adjustment display appears.
4
Press EFCD to adjust the
rectangular distortion of the picture.
Pressing C corrects the distortion of the upper
portion of the picture.
Pressing
D corrects the distortion of the lower
portion of the picture.
Pressing
E corrects the distortion of the left side
portion of the picture.
Pressing
F corrects the distortion of the right side
portion of the picture.
5
Press < to register the adjustment
result.
* You can also use the buttons on
the projector's control panel to
perform these steps.
Installation menu screen
Note
• Adjustment of either of the vertical or horizontal axis restricts the adjustment range of the other. (For example, if the horizontal axis is adjusted to the
maximum level. adjustment of the vertical axis will be made impossible.)
• Adjustment with the Keystone button may cause change the aspect ratio. In this case, correct the aspect ratio by adjusting the size.