Filter
Top Products
E-43
EnglishDeutschEspañolFrançaisItalianoPortuguês
ġུġࢊ
Póññêèé
Ё᭛
Setting Image Enhance (Valid in the DVI-D mode only)
This performs detailed image quality settings.
• Image Identify
This function discerns between the natural image display section and the text display section, and performs correction to enable an
optimized display for each.
Each time
E or F is pressed, the setting is switched.
On < Off
Press
< to store.
Adjusting the Color Temp.
Use E or F to specify a desired color temperature. Each time you press E or F, one of the available choices appears in the
following sequence:
[–3500]:More reddish colors
[+3500]:More bluish colors
[User]:User Color Temp. setup
Press
<: to store.
Setting User Color Temp.
Use C or D to select Red, Green, or Blue, and adjust the color temp. for each.
Press
F: to strengthen the selected color.
Press
E: to weaken the selected color.
Press
< to store.
Note
• The screen display disappears if there is no operation within approximately 60 seconds.
• Depending on the model or the optional devices, some of the functions may not be available.
• The adjustment range varies according to the display signals. Make adjustments to your preferred Sharpness within the adjustment range.
• Depending on the type of signal, it may not be possible to make some of the settings or adjustments.