Fujitsu M4000/M5000 Server User Manual


 
2 SPARC Enterprise M4000/M5000 Servers Product Notes for XCP Version 1060 November 2007
Japanese Site:
http://primeserver.fujitsu.com/sparcenterprise/download/firmwa
re/
Note – When the XCP version preinstalled in your server is under XCP 1060, you
must upgrade to XSCF Control Package(XCP) 1060 or later. Use the web browser
interface, also known as the browser user interface (BUI), to import XCP firmware
and then execute the flashupdate(8) command to upgrade the XCP firmware with
the XSCF Shell.
Caution – CR ID #6534471: Improper handling of large page in kernel memory may
cause random panics. Implement the workaround for CR ID #6534471 or check for
the availability of a patch and install it immediately. This bug has been fixed by
125100-06 and Solaris 10 8/07.
The first version of the Solaris™ Operating System (OS) to support these servers
is the Solaris 10 11/06 OS.
Note – It is required that all SPARC Enterprise M4000/M5000 servers be upgraded
to XCP 1050 or later in order to support adding future COD Right To Use (RTU)
licenses. Contact your local Service Representative for assistance.
Patch Information
This section lists mandatory patches for the SPARC Enterprise M4000/M5000
servers.
These patches are not required for servers running Solaris 10 8/07 OS.
118833-36 (Install 118833-36 before 125100-04.)
125100-04 or later
120068-03 or later
123839-07 or later
125424-01 or later
125075-01 or later
125670-02 or later