Filter
Top Products
16 SPARC Enterprise M4000/M5000 Servers Product Notes for XCP Version 1060 • November 2007
RTIF1-
070824-005
On the XSCF Web, when you changed the
Refresh Interval value of the Monitor Message
Frame, the invalid pop-up "Confirmation
Domain mode" may appear.
Ignore the pop-up and close the screen.
RTIF1-
070824-006
On the tab browser, to the same host, when
you perform multiple log-in with the user
accounts of different user privileges, the user
privilege of the last log-in user account will be
applied to those pages which you've already
logged in.
When you use the tab browser, do not perform
multiple log-in to the same host.
RTIF1-
070824-008
On the Domain Configuration screen, when
you select an undefined Domain ID, the
Configuration Policy remains as the content
which previously displayed.
None available at this time.
RTIF1-
070824-011
While using FireFox2, in the Configuration
policy setting on the Domain Configuration
screen, when you specify a domain which is in
operation, an error display pop-up appears.
When you click on the Back button on this
error display pop-up and click on the Cancel
button on the inquiry screen to re-display the
data, the system remains in the error message
screen.
From the Menu, select the Domain
Configuration page again.
RTIF1-
070904-003
An incorrect domain state is reported. After
the command sendbreak(8) is issued to a
domain, showdomainstatus shows the state
as "Running" when the domain is at the "ok"
prompt.
There is no workaround. This is a side effect of
the sendbreak(8) operation.
RTIF1-
070904-004
The latest communication field in
showarchiving(8) command is not updated
regularly.
Disabling and re-enabling archiving refreshes
the Latest communication field in
showarchiving(8) output.
RTIF1-
070904-006
While executing the domain power-on,
domain reset or DR, in case the XSCF reboot
occurred, the process may be aborted in some
or all of the XSB.
Execute the domain reset one more time, or
power off the domain and then power on
again.
RTIF1-
070914-006
When you set the XSCF user account name to
the maximum 32 characters, you can log in,
but then, when you execute the XSCF Shell or
operate the XSCF Web, "Permission denied"
occurs.
Use up to 31 characters to set the XSCF user
account name.
TABLE 6 XCP Issues and Workarounds (Continued)
ID Description Workaround