Filter
Top Products
SPARC Enterprise M4000/M5000 Servers Product Notes 19
Solaris Issues and Workarounds
TABLE 7 lists known issues and possible workarounds.
TABLE 7 Specific Issues and Workarounds Concerning Solaris
CR ID Description Workaround
6348554 Using the cfgadm -c disconnect
command on the following cards might hang
the command during i_mdi_pi_offline:
• SG-XPCIE2FC-QF4 Sun StorageTek
Enterprise Class 4Gb Dual-Port Fibre
Channel PCI-E HBA
• SG-XPCIE1FC-QF4 Sun StorageTek
Enterprise Class 4Gb Single-Port Fibre
Channel PCI-E HBA
• SG-XPCI2FC-QF4 Sun StorageTek Enterprise
Class 4Gb Dual-Port Fibre Channel PCI-X
HBA
• SG-XPCI1FC-QF4 Sun StorageTek Enterprise
Class 4Gb Single-Port Fibre Channel PCI-X
HBA
There is no workaround.
Check for the patch 126670-10 for this defect.
6416224 System performance can degrade using a
single NIC card with more than 5,000
connections.
Use multiple NIC cards to split network
connections.
This bug has been fixed in Solaris 10 8/07.
6440061 The domain console may display this message:
ipsec_check_inbound_policy: Policy
Failure for the incoming packet (not
secure)
This message can be safely ignored.
6441349 The system may hang if there is an I/O error
in the system.
None available at this time.
This bug has been fixed in Solaris 10 8/07.
6459540 The DAT72 internal tape drive on SPARC
Enterprise M4000/M5000 may time out
during tape operations.
Add the following definition to
/kernel/drv/st.conf:
tape-config-list =
"SEAGATE DAT DAT72-000",
"SEAGATE_DAT____DAT72-000",
"SEAGATE_DAT____DAT72-000";
SEAGATE_DAT____DAT72-000=
1,0x34,0,0x9639,4,0x00,0x8c,0x8c,
0x8c,3;
There are four spaces between SEAGATE DAT
and DAT72-000.