Filter
Top Products
Operation and Cleaning
5-2 C156-E205-01EN
5.1.1 Optical disk drive
Eject button / Busy LED
Disk insertion slot
Manual eject hole
Figure 5.1 Optical disk drive front view (with panel)
The following explains the parts and functions of the optical disk drive (the
following numbers correspond to the numbers in Figures 5.1):
1) Disk insertion slot
Use this slot to insert and eject the optical disk cartridge.
2) Eject button & BUSY LED (display lamp)
On this optical disk drive, this is the push button combining the eject button
with the BUSY LED (display lamp) for ejecting the optical disk cartridge (it
lights in green during seeking and during erasing, writing or reading of data).
When ejection is disabled by the SCSI command, the optical disk cartridge
cannot be taken out.
3) Manual eject hole
This hole is used to eject the optical disk cartridge manually at power-off.
Manual ejection may not be possible just after the power is off.
!
Horizontal
!
Horizontal
!
Vertical
(Two orientations)