Filter
Top Products
General Description
1-4 C156-E205-01EN
1.1.4 Adaptability
(1) Wide operating environment
An LSI circuits reduce power consumption. This drive features a wide operating
environment (5 to 45°C, general office environment). Dust particles are class 5
millions or less.
(2) Vibration resistance (shock resistance)
Rubber vibration isolators protect the drive against external shock or vibration.
(3) Safety standards
!
UL1950 (U.S.A., safety)
!
CDRH class 1 (U.S.A., laser)
!
CSA C22.2 No. 950 (Canada, safety)
!
EN60950 (Europe, safety)
!
EN60825 Class 1 (Europe, laser)
(4) Various radio wave standards
This optical disk device is installed in a host system, and meets the following
standards:
!
EN55022 class B, EN55024 (European wave standards)
!
AS/NZS3548 class B (Australian wave standards)
!
CNS13438 (Taiwanese radio interference standard)
1.1.5 Interface
(1) ATA/ATAPI-4
This drive supports the basic ATA/ATAPI-4 specifications.
ATAPI commands enable operation using logical block addresses that are
independent of the physical attributes of the drive, enabling software flexibility in
terms of system expansion.
Supports PIO Mode 4 Multi-word DMA Mode 2, and Ultra DMA Mode 2.
(2) Continuous block processing
Logical block addresses are used for data block addressing. Without consideration
of the physical attributes of track boundaries, the host can access data by
specifying a block number in logically continuous data space.