Index
C156-E205-01EN IN-3
G
General description 1-1
General notes 3-18
GET MEDIA STATUS 4-25
GET MEDIA STATUS command 4-25
H
Half-height standard 90 mm (3.5-inch) 1-2
Hardware reset 4-13,
Head cleaner 5-6
High-speed data transfer 1-2
High-speed mean seek time 1-2
Host end timing 4-84
Host interface 4-1
Host stop timing 4-83
Host suspend timing 4-87
I
IC 3-2
IDENTIFY PACKET DEVICE 4-26
IDENTIFY PACKET DEVICE command
4-26
IDLE IMMEDIATE 4-33,
IDLE IMMEDIATE command 4-33
Idle mode 4-18
Initialization timing 4-82, 4-85
Initial operation when power is turned on
3-22
Initial self-diagnosis 6-2
INQUIRY command 4-42
INQUIRY data 4-43
Inserting cartridge 5-3, 5-4
Inside optical disk cartridge 3-2
Installation 3-19
Installation direction 3-8
Installation requirement 3-1
Interface 1-4
Interface register 4-6
I/O and C/D 4-11
I/O port function and mapping 4-6
I/O register 4-6
J
Jumper setting 3-15
Jumper setting at factory shipping 3-15
L
Leak magnetic field 3-11
LED indication 4-20
Logical block address format 4-68
Lower power consumption 1-3
Low temperature burn 3-1
M
Maintainability/operability 1-3
Maintenance information 6-3
Maintenance requirement 6-3
Master device setting 3-15
Mean time between failures 1-3, 2-6
Mechanical section 1-7
Media interchangeability 1-2
Media status notification function 4-16
Model and order number 2-1
Model and product number 2-1
Mode page format 4-46, 4-57
Mode parameter 4-44
Mode parameter header 4-45, 4-54, 4-56,
4-58
Mode parameter list 4-45, 4-54, 4-56, 4-58
MODE SELECT (10) command 4-53
MODE SELECT (6) command 4-44
MODE SENSE (10) command 4-57
MODE SENSE (6)command 4-55
Mode setting 3-15
Mounting requirement 3-5
MO write cache 4-16
MTBF 1-3, 2-6
Multiword DMA data transfer 4-80
Multiword DMA data transfer timing 4-80
Multiword DMA data transfer timing
parameter 4-81
N
No overhaul 1-3
NOP 4-33
NOP command 4-33
Note following when affixing index label
5-9
Note on mounting 3-10
Note on usage and storage of cleaning kit
5-12
O
ODD connected to device 1 4-24
Operating optical disk drive 5-1
Operation and cleaning 5-1
Operation confirmation and preparation for
use after installation 3-22
Optical disk cartridge 2-8, 5-7