Filter
Top Products
A26361-K680-Z122-1-7619, Edition 1 15
Operation
Switching the workstation on
► If necessary, switch the monitor on (see the operating manual for the monitor).
► Press the ON/OFF switch on the front of the workstation.
The corresponding indication appears on the LCD (see chapter "Indicators on the workstation") or
the operating indicator
lights, the workstation starts up.
Switching off the workstation
► Shut down the operating system properly. For Windows: select Shut Down from the Start menu.
► If the operating system does not automatically switch the workstation off, turn the workstation
ready-to-use when requested to do so by pressing the ON/OFF switch.
If the workstation is ready-to-use, the workstation consumes very little power.
!
The ON/OFF switch does not separate the workstation from the mains voltage. To
completely disconnect the mains voltage, remove the power plug from the socket.
► If necessary, switch the monitor off (see the operating manual for the monitor).
Placing a workstation (with soft power off function) in a ready-to-operate state by means of
software
With the soft power off function the workstation automatically switches off (standby) or switches into
the energy-saving mode after the operating system is shut down. Requirements: Your system must
support switching off with software and this functionality must be enabled in BIOS Setup. The soft
power off software may also need to be installed on Windows NT systems.
You can also switch your workstation into the standby mode via the DeskView software with the
DeskOff programme.