Filter
Top Products
System expansions
A26361-K680-Z122-1-7619, Edition 1 33
► Close the casing (see "Closing the casing" chapter).
i
If you have installed or removed a PCI board, please check the relevant PCI slot settings
in the
BIOS Setup. If necessary, change the settings. Further information is provided in the
PCI board documentation.
Installing board with clip
► Open the casing (see "Opening the casing" chapter).
2
1
2
► Press on the clip (1) in the direction of the arrow and unhook it.
► Pull off the clip (2).
► Remove the rear slot cover plate from the slot (2).
!
Do not dispose of the cover plate. For cooling, protection against fire and in order to
comply with EMC regulations, you must refit the cover plate if you remove the board.
► Make the required settings for the board.