Filter
Top Products
System expansions
28 A26361-K680-Z122-1-7619, Edition 1
Opening the casing
► Switch off the workstation. The workstation must not be in the energy-saving mode.
!
Please take note of the safety information in the "Important notes" chapter.
Pull the power plug out of the mains outlet.
Only insert the power plug after you have closed the casing.
► Remove any connected cables in the unit that obstruct you.
► Place the device in a convenient working position.
1
1
► Unscrew the two knurled screws (1) on
the back of the casing.
a
► Slide the side cover approximately 2 cm (a) in the direction of the arrow (1), until the stop.
► Unhook the upper edge of the side cover from the casing.
► Pull the side cover in the direction of the arrow of the casing.