Filter
Top Products
System expansions
46 A26361-K680-Z122-1-7619, Edition 1
Installing a hard disk drive
► Take the new hard disk drive out of its packaging.
► Make the required settings (e.g. master-slave settings) on the drive.
► Secure the EasyChange rails on the side of
the hard disk by inserting the upper pins of
the EasyChange rail in the corresponding
holes of the hard disk.
1
► Push the hard disk drive into the casing (1) until the EasyChange rails engage.
► Connect the data and power supply cables to the hard disk drive or to the hard disk drives.
i
Connect the blue plug of the data cable to the connection on the mainboard. Connect the
plug on the other end to the hard disk drive.
► Attach the front panel (see "Attaching the front panel" chapter).
► Close the casing (see "Closing the casing" chapter).
i
It may be necessary to modify the entry for the drive in the
BIOS Setup.