Filter
Top Products
System expansions
A26361-K680-Z122-1-7619, Edition 1 39
Installing an accessible drive
► Open the casing (see "Opening the casing" chapter).
► Remove the front (see "Removing the front panel" chapter).
► Pull the empty slide-in module out of the
casing.
2
2
1
1
1
1
► Loosen the screws (1).
► Remove the rails from the cover (2).
i
Do not throw away the cover of the empty slide-in module. For cooling, protection against
fire, and in order to comply with EMC regulations, you must refit the empty slide-in module
if you remove the drive again later.
► Take the new drive out of its packaging.
► Adjust the required settings on the drive (if necessary, on already-installed drives as well).