Filter
Top Products
26 Maintenance Manual RX900 S1
Before you start
Replacing a faulty component
The global error indicator on the front and on the rear side of the server
indicates that a hardware components needs to be replaced. For information on
the control elements and indicators of your server see "PRIMERGY RX900 S1
Server - Operating manual".
If the system has been powered off to replace a non-hot plug unit, a system of
PRIMERGY diagnostics indicators guides you to the faulty component. The
CSS button enables the indicator of the faulty component to light up even if the
power has been switched off, see "Using diagnostics information" on page 37.
If a defective component is included in the CSS concept, the CSS indicators on
the front and rear side of the server light up. For more information see the
"ServerView Suite Local Service Concept - LSC" manual and the "Customer
Self Service (CSS)" manual on the ServerView Suite DVD 2.
It is recommended to prepare local maintenance tasks by remote diagnostics
procedures introduced in the "ServerView Suite Local Service Concept - LSC"
manual on the ServerView Suite DVD 2.