Filter
Top Products
2 SPARC Enterprise T5140 and T5240 Servers Administration Guide • July 2009
Related Information
■ “Log In to ILOM” on page 2
■ Integrated Lights Out Manager (ILOM) 2.0 Documentation
■ Integrated Lights Out Manager (ILOM) 2.0 Supplement for SPARC Enterprise T5140
and T5240 Servers
■ Integrated Lights Out Manager (ILOM) 3.0 Documentation
■ Integrated Lights Out Manager (ILOM) 3.0 Supplement for SPARC Enterprise T5140
and T5240 Servers
▼ Log In to ILOM
This procedure assumes the default configuration of the service processor as
described in your server’s installation guide.
● Open an SSH session and connect to the service processor by specifying its IP
address.
The ILOM default username is root and the default password is changeme.
You are now logged in to ILOM. Perform tasks as needed.
Note – To provide optimum system security, change the default system password.
% ssh root@xxx.xxx.xxx.xxx
...
Are you sure you want to continue connecting (yes/no) ? yes
...
Password: password (nothing displayed)
Waiting for daemons to initialize...
Daemons ready
Integrated Lights Out Manager
Version 2.0.0.0
Copyright 2008 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
->