Filter
Top Products
58 SPARC Enterprise T5140 and T5240 Servers Administration Guide • July 2009
prompt, 4
ILOM commands
set /SYS/LOCATE,45
ILOM overview, 1
ILOM, log in, 2
ILOM, log in to the system console, 3
init (Solaris command), 4
input-device (OpenBoot configuration
variable), 5
K
keyboard, attaching, 5
L
LDoms (Logical Domains Software), 51
LDoms configuration, 52
LDoms overview, 51
LEDs
Activity (disk drive LED), 34
OK-to-Remove (disk drive LED), 32, 33
local graphics monitor, 5
locate the system, 45
Locator (system status LED)
controlling from -> prompt, 45
logical device name (disk drive), reference, 35
M
monitor, attaching, 5
multipathing software, 40
O
ok prompt, display, 3, 4
OK-to-Remove (disk drive LED), 32, 33
OpenBoot commands
reset-all,6
setenv,5
OpenBoot configuration variables
described, table, 53
input-device,5
output-device,5
OpenBoot variables, 53
output-device (OpenBoot configuration
variable), 5
P
PCI graphics card
connecting graphics monitor to, 5
frame buffers, 5
physical device name (disk drive), 35
POST diagnostics, run, 44
power off, 8
power on, 7
R
RAID support, 13
RAID, configure and label a volume, 22
RAID, create a hardware mirrored volume, 15
RAID, create a hardware mirrored volume of the
boot device, 19
RAID, create a hardware striped volume, 20
RAID, creating volumes, 14
RAID, delete a volume, 25
RAID, hot-plug a mirrored disk, 28
RAID, hot-plug a nonmirrored disk, 30
raidctl (Solaris command), ?? to 30
reset, 8, 9
reset-all (OpenBoot command), 6
S
set /SYS/LOCATE (-> command), 45
setenv (OpenBoot command), 5
shutdown (Solaris command), 4
Solaris commands
cfgadm,31
cfgadm install_device, cautions against
using, 32
cfgadm remove_device, cautions against
using, 32
init, 4
raidctl, ?? to 30
shutdown, 4
system console
log in, 3
system, communicating with, 1