Filter
Top Products
20 SPARC Enterprise T5140 and T5240 Servers Administration Guide • July 2009
4. Install the volume with the Solaris OS using any supported method.
The hardware RAID volume c1t0d0 appears as a disk to the Solaris installation
program.
Note – The logical device names might appear differently on your system,
depending on the number and type of add-on disk controllers installed.
Related Information
■ “Disk Slot Numbers” on page 35
■ “Create a Hardware Mirrored Volume” on page 15
■ “Configure a Hardware RAID Volume for the Solaris OS” on page 22
▼ Create a Hardware Striped Volume
1. Verify which hard drive corresponds with which logical device name and
physical device name.
See “Disk Slot Numbers” on page 35.
To verify the current RAID configuration, type:
The preceding example indicates that no RAID volume exists.
# raidctl
Controller: 1
Disk: 0.0.0
Disk: 0.1.0
Disk: 0.2.0
Disk: 0.3.0
Disk: 0.4.0
Disk: 0.5.0
Disk: 0.6.0
Disk: 0.7.0