Filter
Top Products
Performing Common Tasks 9
● To reset the system, from the Solaris prompt, type:
Related Information
■ “Power Off the System” on page 8
■ “Power On the System” on page 7
▼ Update the Firmware
1. Ensure that the ILOM service processor network management port is
configured.
See the server’s installation guide for instructions.
2. Open an SSH session to connect to the service processor.
3. Power off the host. Type:
4. Set the keyswitch_state parameter to normal. Type:
# shutdown -g0 -i6 -y
% ssh root@xxx.xxx.xxx.xxx
...
Are you sure you want to continue connecting (yes/no) ? yes
...
Password: password (nothing displayed)
Waiting for daemons to initialize...
Daemons ready
Integrated Lights Out Manager
Version 2.0.0.0
Copyright 2008 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
->
-> stop /SYS
-> set /SYS keyswitch_state=normal