Filter
Top Products
7
Performing Common Tasks
This section includes procedures for some common tasks performed on the servers.
■ “Power On the System” on page 7
■ “Power Off the System” on page 8
■ “Reset the System” on page 8
■ “Update the Firmware” on page 9
▼ Power On the System
1. “Log In to ILOM” on page 2
2. At the ILOM -> prompt, type:
Note – To force a power-on sequence, use the start -script /SYS command.
Related Information
■ “Power Off the System” on page 8
■ “Reset the System” on page 8
-> start /SYS
Are you sure you want to start /SYS (y/n) ? y
Starting /SYS
->