Filter
Top Products
6 SPARC Enterprise T5140 and T5240 Servers Administration Guide • July 2009
Note – There are many other system configuration variables. Although these
variables do not affect which hardware device is used to access the system console,
some of the variables affect which diagnostic tests the system runs and which
messages the system displays at its console. For details, refer to the service manual
for your server.
8. To cause the changes to take effect, type:
The system stores the parameter changes and boots automatically when the
OpenBoot configuration variable auto-boot? is set to true (the default value).
Note – To cause the parameter changes to take effect, you can also power cycle the
system using the front panel Power button.
You can now type system commands and view system messages using your local
graphics monitor. Continue with your installation or diagnostic procedure, as
needed.
ok reset-all