Filter
Top Products
45
Saving and Recalling Picture Settings
Once you’ve adjusted the picture using Cinema Color Editor, you can save your settings in
the projector’s memory. Then you can use the remote control (or Cinema Color Editor) to
easily recall them for future use.
To save your settings on the projector:
1. Select
Picture Quality, then click Memory management and choose Register.
2. On the next screen, click the
Advance tab to save your settings if you’ve made changes to
the picture using the RGBCMY adjustments. Otherwise, click
Standard.
3. Select an unused memory name, then click
Register. Your current settings are saved to
the projector’s memory.
Select
Picture Quality
Click Memory
management
Click
Register
Select Standard
or Advance
Select an unused
memory name
Click Register
PowerLite Cinema 200+.book Page 45 Thursday, August 18, 2005 2:37 PM