Filter
Top Products
Magnum 3000 Stackable Hubs Installation and User Guide (07/06)
41
www GarrettCom com
..
From the top menu prompt > , type: C {Cr}.
On the terminal, the prompt will appear: CFG>
The agent configuration menu consists of the following commands:
ADDRESS
BOOTP
COMMUNITY
DISPLAY
GATEWAY
MANAGER
NAMESERVER
SUBNETMASK
EXIT
To see a command selection menu, type: help {Cr}. On the terminal screen, a menu with
command lines and the meaning of each command will appear:
A[DDRESS] [ IP/ NAME] IP address
B[OOTP] [IP/NAME] Bootp Server
C[OMMUNITY] [# [NAME[S] [MANAGER....]]] Communities access:
S - Allow Set operations
Managers - list of IP addresses and/or names
D[ISPLAY] Display whole configuration
E[XIT] Exit configuration
G[ATEWAY] [# [IP [SUBNETIP [MASKIP]]]] Gateways
M[ANAGER] [# [IP/NAME [PORT] COMMUNITY]] Managers
N[AMESERVER] [# [IP/NAME]] Name Servers
S[UBNETMASK] [IP] Subnet mask
(end of “terminal screen” illustration)
Command or Function Listing
1. ADDRESS:
A[DDRESS] [ IP/ NAME]
The "Address" command is used to define and/or display an agent's IP address.
To set an IP address, type: A [ address value ] {Cr}
( Example: >A 45.9.0.38 {Cr} )
To display the current IP address, type: A{Cr}
2. BOOTP
B[OOTP] [IP/NAME]
Used to define or display the IP address and/or name of your BOOTP server.
To set, type: B [address value/name] {Cr}
( Example: >B 45.9.0.171 )