Gateway 920 Server User Manual


 
28
Chapter 3: Maintaining Your Server
www.gateway.com
Cleaning your server
Keeping your server clean and the vents free from dust helps keep your server
performing at its best. You may want to gather these items and put together a
server cleaning kit:
A soft, lint-free cloth
Glass cleaner
An aerosol can of air that has a narrow, straw-like extension
Isopropyl alcohol
Cotton swabs
A tape drive cleaning cartridge (if a tape drive is installed)
A CD drive cleaning kit
Cleaning the exterior
Always turn off your server and other peripheral devices before cleaning any
components.
Use a damp, lint-free cloth to clean your server and other parts of your system.
Do not use abrasive or solvent cleaners because they can damage the finish on
components.
Your server is cooled by air circulated through the vents on the case, so keep
the vents free of dust. With your server turned off and unplugged, brush the
dust away from the vents with a damp cloth. Be careful not to drip any water
into the vents.
Warning When you shut down your server, the power turns off, but
some electrical current still flows through your server. To
avoid possible injury from electrical shock, unplug the
power cord and all other cables connected to the server.