Gateway 920 Server User Manual


 
65
Replacing the system board
www.gateway.com
11 Install the memory, processor, and heat sink, then reconnect the heat sink
cooling fan to the system board.
12 Connect the power and data cables.
13 Install the expansion cards by following the instructions in “Installing PCI
expansion cards” on page 56.
14 Close the server case by following the instructions in “Closing the server
case” on page 44.
15 Turn on your server.
16 Press F2 when the Gateway logo screen appears during startup. The BIOS
Setup utility opens.
17 Check BIOS settings to make sure that they detect the server’s new
hardware, then save your changes (if any) and close the BIOS Setup utility.