Filter
Top Products
75
Resetting the BIOS
www.gateway.com
Resetting the BIOS
The Reset BIOS jumper on the system board lets you return all BIOS settings
to the factory defaults.
To reset the BIOS:
1 Print the appendix for BIOS Settings in this guide.
2 Restart your server, then press F2 when the Gateway logo screen appears
during startup. The BIOS Setup utility opens.
3 Record any custom BIOS settings on your printout.
4 Follow the instructions in “Preventing static electricity discharge” on
page 41.
5 Turn off the server, then disconnect the power cord and all other cables
connected to the server.
6 Remove the side panel. For more information, see “Opening the server
case” on page 42.
7 Place the jumper across pins 3-4 of jumper J13.
Warning Moving the jumper while the power is on can damage your
server. Always turn off the server and unplug the power
cord and all other cables before changing the jumper.
Jumper pins 3-4