Filter
Top Products
69
Replacing the CMOS battery
www.gateway.com
7 Place the edge of a small flat-head screwdriver under the battery and lift
the battery up until it comes out of the socket.
8 Make sure that the positive (+) side of the new battery is facing up, then
press the new battery into the socket until it snaps into place.
9 Close the server case by following the instructions in “Closing the server
case” on page 44.
10 Turn on the server.
11 When the Gateway Logo screen appears, press F2 to open the BIOS Setup
utility.
12 Restore any BIOS settings that you wrote down in Step 3.
13 Save all your settings and close the BIOS Setup utility.