Filter
Top Products
91
Troubleshooting
www.gateway.com
To restore files that were deleted in Windows 2000 Server:
1 Double-click the Recycle Bin icon.
2 Right-click the file you want to restore, then click Restore.
Hard drive
You receive an “Insufficient disk space” error message
■ In Windows 2000 Server, delete unnecessary files from the disk using Disk
Cleanup. For more information, see “Using Disk Cleanup” on page 24.
■ In Windows 2000 Server, empty the Recycle Bin by right-clicking the
Recycle Bin icon, then clicking Empty Recycle Bin.
■ Save your files to a diskette or another drive. If the hard drive is full, copy
any files not regularly used to diskettes or other backup media, then delete
them from the hard drive.
The hard drive cannot be accessed, or you receive a “General failure
reading drive C” error message
■ If a diskette is in the diskette drive, eject it and restart your server.
■ Try restarting your server by pressing CTRL+ALT+DEL.
■ Open your server and make sure that the cables are connected correctly
to the hard drive and the system board. For more information, see
“Installing a hard drive” on page 51.
■ If your server has been subjected to static electricity or physical shock, you
may need to reinstall the operating system.
■ Use GWScan to test the hard drive. For more information, see “You need
to troubleshoot an IDE hard drive” on page 93.
You receive a “Non-system disk” or “disk error” error message
■ Eject the diskette from the diskette drive, then press ENTER.
■ Make sure that your hard drive has an active partition by using FDISK. For
more information, see “The master boot record is corrupted” on page 92.