Filter
Top Products
258
Chapter 15: Upgrading Your Gateway M275
www.gateway.com
8 Pull the memory module out of the slot.
9 Hold the new or replacement module at a 30-degree angle and press it into
the empty memory slot. This module is keyed so it can only be inserted
in one direction. If the module does not fit, make sure that the notch in
the module lines up with the tab in the memory bay.
10 Gently push the module down until it clicks in place.
11 Replace the memory bay cover and tighten the cover screws.
12 Insert the batteries, then turn your convertible tablet PC over.
13 Reattach the optional port replicator.
14 Connect the power adapter and modem and network cables, then turn on
your convertible tablet PC.
Important Use only memory modules designed for the
Gateway M275.