Filter
Top Products
Cd 39 Helvetica CondensedHelvetica Chapter 3— Maintaining the Printer
EasyCoder 3400e Bar Code Label Printer User’s Manual 37
8 Engage the printhead by turning the head lift lever counterclockwise
until the printhead locks.
9 If you are finished cleaning, replace the media cover.
Cleaning the Media Guides and Media Path
You should clean the media guides and media path regularly to keep debris
off the media surface and printhead where irregularities can spoil print
quality or damage the printhead. Cleaning the guides also prevents the
media from skewing or improperly tracking as it travels through the paper
path which can result in smeared images and print off the side of the label.
Always clean the media guides immediately after a label jam in the printer.
To clean the media guides and media path
1 Turn the On/Off switch to the off position and remove the power cord.
2 Remove the media cover.
3 Remove the media and ribbon (if necessary).
4 Pull down on the lower media guide to open up the media path.
3XXXU.035
Power/Data
3400
Alert
F
eed/Pause
Empty/Pause
Intermec
I
n
te
r
me
c
Media
path
Upper medi
a
guide
Lower
media
guide
5 Use the cloth moistened with isopropyl alcohol to clean the upper and
lower media guides. Be sure to remove all traces of debris. Release the
lower media guide.
6 Remove all traces of dust, paper, and adhesive from the media path with
a soft bristle brush or vacuum.
7 Replace the media and ribbon.
8 If you are finished cleaning, replace the media cover.