Filter
Top Products
35
Standard Operations
5.3 Store, recall, send and delete data
5.3.1 The Data Log
The Data Log will store up to 1000 readings taken in the modes:
Stored Programs, User Programs, Favorite Programs, Single
Wavelength and Multi Wavelength. A complete record of the
analysis is stored, including the Date, Time, Results, Sample ID,
and Operator ID.
5.3.1.1 Auto/manual data storage
The data storage parameter indicates whether data are to be stored
automatically or manually (in which case the user has to decide
which data to store).
1. Press Store: On/Off in the Options menu.
• With the Store On setting, all measurement data are stored
automatically.
• With the Store Off setting, no measurement data are
stored. However, this setting can be changed to Store On
in the result display through configuration. The reading
currently shown in the display is then stored.
Note: When the instrument's memory (data log) is full, the oldest data are
automatically deleted allowing the new data to be stored.
5.3.1.2 Recall stored data from the data log
1. Press Recall Data in the Main Menu.
2. Press Data Log.
A listing of the stored data is displayed.
3. Press Filter: On/Off.