Filter
Top Products
116
Advanced Operations
6.3.8 Browser access
The Browser access menu contains communication settings for a LAN connection
between the sc1000 controller and a computer.
For more detailed information refer to section 5.13.4 on page 70.
6.3.9 Storage card
The Storage card menu contains various commands for saving sc1000 controller log files
to a SD card and restoring software settings from a SD card.
For more detailed information refer to section 3.11 on page 49.
Note: If a probe does not support the SAVE/RESTORE commands, the error message “FAIL” is
displayed.
SYSTEM SETUP
BROWSER ACCESS
LOGIN PASSWORD Login password for remote (GSM)/LAN-access
IP ADDRESS
Default value: 192.168.154.30
Enter an IP address to identify the sc1000 controller on the network.
NETMASK
Default value: 255.255.255.0
Enter a (sub) Netmask to identify the sc1000 controller on the network.
GATEWAY
Default value: 192.168.154.1
Enter the IP address used for GATEWAY functionality.
SYSTEM SETUP
STORAGE CARD
SAVE LOG FILES
Saves log files from all devices in a .csv file. The .csv file is stored in the sc1000\log folder on the
storage card and can be opened for example with Microsoft™ Excel.
DAILY LOG
Saves the daily log in a .csv file. The .csv file is stored in the sc1000\daily log folder on the
storage card and can be opened for example with Microsoft Excel.
UPDATE ALL Updates all devices with software found in the update folder of the storage card.
SAVE DIAGNOSTIC
FILE
Saves the diagnostic file to the storage card. The .wri file is stored in the sc1000 folder of the
storage card and can be opened for example with Microsoft Word, Wordpad or Windows Write.
SAVE DEVICE Saves single device settings in the sc1000\backup folder of the storage card.
RESTORE DEVICE Restores single device settings from the sc1000\backup folder of the storage card.
SAVE ALL DEVICES Saves configuration of all devices to the sc1000\backup folder of the storage card.
RESTORE ALL
DEVICES
Restores all device settings from the sc1000\backup folder of the storage card.
ERASE ALL Removes all files from storage card and creates the storage card folder structure (Table 13).