Filter
Top Products
14
Loading Originals into the
Feeder
C
Pos. 1
Pos. 10
A
B
Figure 5: Loading originals into the Feeder
To load originals into Batch Feeder, refer to Figure 5 and do the follow-
ing:
Important! Use only original holders (A) that are tted with the
special plastic rail (B), otherwise the Feeder will not be able to un-
load the holder properly.
Place your original into an appropriate original holder (A). See your
scanner documentation for a complete description of how to work
with Flextight original holders.
Place the original holder (A) into the rst empty slot in the Feeder
magazine. Slide it gently into the slot until it comes to a stop. (To re-
move the original holder, just slide it back out.)
NOTE! We recommend that you load original holders into the
magazine from the top and down, starting from position 1.
1.
2.
3.