Hasselblad 848 Scanner User Manual


 
29
e scanner now shuts down and the Align Feeder window updates
with new instructions.
Remove the Feeder and use the adjustment tool to re-tighten the self-
locking nut on the rear of the Feeder (see also Figure 8, above).
Re-mount the Feeder on your scanner and then turn on the scanner.
When the scanner comes online, click on Continue in the Align
Feeder window.
e Align Feeder window updates to tell you that the procedure is
complete.
Click on Done to close the Align Feeder window.
9.
10.
11.
12.