Filter
Top Products
31
Preparing the Feeder for
Storage or Shipping
Storing the Feeder
To store the Feeder while it is not in use:
Detach the Feeder using the soware-guided procedure given “Un-
mounting the Batch Feeder” on page 12.
Retrieve the box in which your Feeder was originally delivered. is
box is made of sturdy cardboard and includes a foam lining custom
cut to hold the Feeder safely and securely.
Lay the box down on the oor or on a table.
Open the box, remove the top slab of foam and set it aside.
Align the Feeder so that it will t into the cut foam.
Lower the Feeder into the box.
Replace the top slab and close the box.
e Feeder is now prepared for storage
Shipping the Feeder
If you need to ship the feeder, for example to a new studio or back to Has-
selblad for service, then do the following:
Detach the Feeder using the soware-guided procedure given “Un-
mounting the Batch Feeder” on page 12.
Retrieve both the original shipping screws and storage/shipping box
in which your Feeder was originally delivered.
1.
2.
3.
4.
5.
6.
7.
1.
2.