Hasselblad 848 Scanner User Manual


 
5
When you switch on the scanner, the Feeder will position itself into
its “home” position, if not already there. Do not touch the Feeder
while the magazine is moving.
Before servicing the scanner and/or Feeder, the power supply must be
disconnected from the mains (unplugged). It is not sucient simply
to press the on/o button on the scanner.
Install the scanner and Feeder in a location where they are not acces-
sible by children. e units contain small openings and moving parts
that can cause injury.
When using the Feeder, a huge amount of data is generated. Make
sure to allocate ample hard disk space for scanned images on the disk
of the attached host computer.
When Operating the Feeder
Do not touch the Feeder while the magazine is moving.
Do not touch the originals or the original holders during scanning.
Do not start scanning or previewing until an original holder with an
original has been mounted.
Flexible original holders are only to be mounted or removed when the
drum is in the load position.
System Requirements
For All Users
Hasselblad Flextight 848 or 949 Scanner.
Additional original holders.
For Macintosh Users
A computer running Mac OS 10.2.1 or later
FlexColor 4.0.2 or later for Mac OS
For Windows Users
A computer running Windows 2000 or XP
FlexColor 4.0.2 or later for Windows