Filter
Top Products
ENWW System requirements for HP LaserJet 1010 series printer software 21
System requirements for HP LaserJet 1010 series printer software
For both direct and network connection, all of the computers that use the printer must meet the
following minimum requirements as listed below.
IBM-compatible computer with an available USB or parallel port (HP LaserJet 1015 only) and the
following:
! Windows 95 (printer driver only, parallel connections only, HP LaserJet 1015 only): Pentium
90 MHz processor or faster and 32 MB or more of RAM
! Windows NT 4.0 (Service Pack 3 or higher, printer driver only, parallel connections only, HP
LaserJet 1015 only): Pentium 90 MHz processor or faster and 32 MB or more of RAM
! Windows 98: Pentium 90 MHz processor or faster and 32 MB or more of RAM
! Windows Me: Pentium 150 MHz processor or faster and 32 MB or more of RAM
! Windows 2000: Pentium 133 MHz processor or faster and 64 MB or more of RAM
! Windows XP (32-bit): Pentium II 300 MHz processor or faster and 128 MB or more of RAM
Note Windows 95 and Windows NT 4.0 do not support USB. You must use a parallel connection (HP
LaserJet 1015 only) or network connection to use one of these operating systems.
For Windows systems
The HP LaserJet 1012 and 1015 series software has the following additional requirements for
network connections:
! TCP/IP protocol installed