Filter
Top Products
Removal and Replacement of Parts (without Calibration)7-2
Before You Begin
Check the following before you begin disassembly :
1. The printer is turned off and the power cable has been disconnected from the socket.
2. Paper has been removed from the tray.
3. Ink cartridges and pens are removed from the printer.
Caution
§ Your body may discharge static current which may damage the fragile PCAs. Before disassembly please
ensure that the proper precautions to prevent damage by electrostatic discharge (ESD) to ESD-sensitive
printer components have been taken with ESD heel or wrist straps. Ensure also that the work area is
similarly free of static current.
§ When disassembling the printer, ensure that the capacitors are fully discharged before you handle power
supply components. As a precaution, switch off the printer before disconnecting it from the power
socket, and wait five seconds before commencing disassembly.