Filter
Top Products
Removal and Replacement of Parts (without Calibration) 7-43
Replacement of Parts
Replacement of Secondary Star Wheel
You will be removing the secondary star wheel from the printer and installing a secondary new star wheel.
Removing the Secondary Star Wheel
Step 1. Remove the Main Case (refer to the
procedures in Removing the Main Case
from Replacement of Main Case).
Step 2. From the front of the printer, push the two
small latches of the secondary star wheel in
and the main latch upwards. Use a screw
driver if required.
Step 3. Slide the star wheel up from the top of the
printer.