Filter
Top Products
Extending aplets 17-5
To transmit
an aplet
1. Connect the PC or aplet disk drive to the calculator by
cable
or
align the two calculators’ infrared ports by matching
up the triangle marks on the rims of the calculators.
Place the calculators no more than 2 inches (5 cm)
apart.
2. Sending calculator: Open the Library, highlight the
aplet to send, and press .
– You have two options: another hp 39g+ or a disk
drive on a PC. Highlight your selection and press
.
– If transmitting to a disk drive, you have the
options of sending to the current (default)
directory or to another directory.
3. Receiving calculator: Open the aplet library and
press .
– You have two options: another hp 39g+ or a disk
drive (or computer). Highlight your selection and
press .
The Transmit annunciator— —is displayed until
transmission is complete.
If you are using the PC Connectivity Kit to download
aplets from a PC, you will see a list of aplets in the PC’s
current directory. Check as many items as you would like
to receive.
Sorting items in the aplet library menu list
Once you have entered information into an aplet, you
have defined a new version of an aplet. The information
is automatically saved under the current aplet name, such
as “Function.” To create additional aplets of the same
type, you must give the current aplet a new name.
The advantage of storing an aplet is to allow you to keep
a copy of a working environment for later use.
The aplet library is where you go to manage your aplets.
Press . Highlight (using the arrow keys) the name
of the aplet you want to act on.