Filter
Top Products
Configuration Commands
103
Table 76 System Configuration commands
Command Usage
[no] enable <string>
Allows administrators to assign the Privilege EXEC password. The
password will be required to enter Privilege EXEC mode. The default value
is disabled.
Command mode: Global configuration
show system
Displays the current system parameters.
Command mode: All
System host log configuration
The following table describes the Syslog Configuration commands.
Table 77 Syslog Configuration commands
Command Description
[no] logging host {<1-2>} address {<IP
address>}
Sets the IP address of the first or second syslog host. For
example, 100.10.1.1.
Command mode: Global configuration
logging host {<1-2>} severity {<1-7>}
Sets the severity level of the first or second syslog host
displayed. The default is 7, which means log all the severity
levels.
Command mode: Global configuration
logging host {<1-2>} facility {<1-7>}
This option sets the facility level of the first or seconds syslog
host displayed. The default is 0.
Command mode: Global configuration
[no] logging console
Enables or disables delivering syslog messages to the
console. When necessary, disabling console ensures the
switch is not affected by syslog messages. It is enabled by
default.
Command mode: Global configuration