Filter
Top Products
Configuration Commands
112
Table 83 SNMPv3 Configuration commands
Command Description
snmp-server group <1-16>
Configures an SNMP group. A group maps the user name to the access group
names and their access rights needed to access SNMP management objects.
A group defines the access rights assigned to all names that belong to a
particular group. The range is 1-16.
Command mode: Global configuration
snmp-server community
<1-16>
Configures a community table entry. The community table contains objects for
mapping community strings and version-independent SNMP message
parameters. The range is 1-16.
Command mode: Global configuration
snmp-server target-address
<1-16>
Configures the destination address and user security levels for outgoing
notifications. This is also called the transport endpoint. The range is 1-16.
Command mode: Global configuration
snmp-server target-
parameters <1-16>
Configures SNMP parameters, consisting of message processing model,
security model, security level, and security name information. There may be
multiple transport endpoints associated with a particular set of SNMP
parameters, or a particular transport endpoint may be associated with several
sets of SNMP parameters. The range is 1-16.
Command mode: Global configuration
snmp-server notify <1-16>
Configures a notification index. A notification application typically monitors a
system for particular events or conditions, and generates Notification-Class
messages based on these events or conditions. The range is 1-16.
Command mode: Global configuration
snmp-server version
{v1v2v3|v3only}
Enables or disables the access to SNMP version 1 and version 2. This
command is enabled by default.
Command mode: Global configuration
show snmp-server v3
Displays the current SNMPv3 configuration.
Command mode: All