Filter
Top Products
Configuration Commands
181
Table 169 RMON Alarm commands
Command Description
rmon alarm <1-65535> owner
<1-127 characters>
Enter a text string that identifies the person or entity that uses this alarm
index.
The owner can have a maximum of 127 characters.
Command mode: Global configuration
no rmon alarm <1-65535>
Deletes this alarm index.
show rmon alarm
Displays the current RMON Alarm parameters.
Command mode: All
Port mirroring
Port Mirroring is used to configure, enable, and disable the monitored port. When enabled, network
packets being sent and/or received on a target port are duplicated and sent to a monitor port. By
attaching a network analyzer to the monitor port, you can collect detailed information about your network
performance and usage. Port mirroring is disabled by default.
NOTE: See the “Troubleshooting tools” appendix in the HP 10Gb Ethernet BL-c Switch Application
Guide for information on how to use port mirroring.
The following table describes the Port Mirroring Configuration commands.
Table 170 Port Mirroring Configuration commands
Command Description
[no] port-mirroring enable
Enables or disables port mirroring.
Command mode: Global configuration
show port-mirroring
Displays current settings of the mirrored and monitoring ports.
Command mode: All except User EXEC