Filter
Top Products
Configuration Commands
118
Table 90 SNMPv3 Target Parameters Table Configuration commands
Command Description
snmp-server target-parameters <1-16>
level {noAuthNo-
Priv|authNoPriv|authPriv}
Selects the level of security to be used when generating the
SNMP messages using this entry. The level noAuthNoPriv
means that the SNMP message will be sent without authen-
tication and without using a privacy protocol. The level
authNoPriv means that the SNMP message will be sent with
authentication but without using a privacy protocol. The
authPriv means that the SNMP message will be sent both
with authentication and using a privacy protocol.
Command mode: Global configuration
no snmp-server target-parameters
<1-16>
Deletes the targetParamsTable entry.
Command mode: Global configuration
show snmp-server target-parameters
<1-16>
Displays the current targetParamsTable configuration.
Command mode: All
SNMPv3 Notify Table configuration
SNMPv3 uses Notification Originator to send out traps. A notification typically monitors a system for
particular events or conditions, and generates Notification-Class messages based on these events or
conditions.
The following table describes the SNMPv3 Notify Table Configuration commands.
Table 91 SNMPv3 Notify Table Configuration commands
Command Description
snmp-server notify <1-16> name
<1-32 characters>
Defines a locally arbitrary but unique identifier associated with this
SNMP notify entry.
Command mode: Global configuration
snmp-server notify <1-16> tag
<1-255 characters>
Defines a tag of 255 characters maximum that contains a tag value
which is used to select entries in the Target Address Table. Any entry in
the snmpTargetAddrTable, that matches the value of this tag, is
selected.
Command mode: Global configuration
no snmp-server notify <1-16>
Deletes the notify table entry.
Command mode: Global configuration
show snmp-server notify <1-16>
Displays the current notify table configuration.
Command mode: All