Filter
Top Products
Configuration Commands
116
Table 87 SNMPv3 Group Configuration commands
Command Description
show snmp-server group <1-16>
Displays the current vacmSecurityToGroup configuration.
Command mode: All
SNMPv3 Community Table configuration
These commands are used for configuring the community table entry. The configured entry is stored in the
community table list in the SNMP engine. This table is used to configure community strings in the Local
Configuration Datastore (LCD) of SNMP engine.
The following table describes the SNMPv3 Community Table Configuration commands.
Table 88 SNMPv3 Community Table Configuration commands
Command Description
snmp-server community <1-16>
index <1-32 characters>
Configures the unique index value of a row in this table. The index can
have a maximum of 32 characters.
Command mode: Global configuration
snmp-server community <1-16>
name <1-32 characters>
Defines the name, up to 32 characters.
Command mode: Global configuration
snmp-server community <1-16>
user-name <1-32 characters>
Defines a readable 32 character string that represents the corresponding
value of an SNMP community name in a security model.
Command mode: Global configuration
snmp-server community <1-16>
tag <1-255 characters>
Configures a tag of up to 255 characters maximum. This tag specifies a
set of transport endpoints to which a command responder application
sends an SNMP trap.
Command mode: Global configuration
no snmp-server community
<1-16>
Deletes the community table entry.
Command mode: Global configuration
show snmp-server community
<1-16>
Displays the community table configuration.
Command mode: All
SNMPv3 Target Address Table configuration
These commands allow you to set passwords and display current user statistics. Passwords can be a
maximum of 15 characters. To disable a user, set the password to null.
The following table describes the SNMPv3 Target Address Table Configuration commands.
Table 89 SNMPv3 Target Address Table Configuration commands
Command Description
snmp-server target-address <1-16>
address <IP address> name <1-32
characters>
Configures the locally arbitrary, but unique identifier, target
address name associated with this entry.
Command mode: Global configuration